GermanDesktop groß
Econik SIX
Powerful. Fully active. Made in Germany.
A compact speaker with floorstanding speaker genes and a bass of 24 Hz? This old dream of many loudspeaker fans has come true with the Econik Six. However, the fully active loudspeaker not only scores when equipped with the two 6.5" drivers and the high-end dome tweeter from SEAS. It's also hard to beat when it comes to flexibility. You simply place the Econik Six in the room where they sound best and transmit your music in high-res via WiSA without any disruptive signal cables. Various sound presets are available to further improve the sound. This unique opportunity to adapt the speaker perfectly to your room and your needs is just part of the variety of settings available. An automatic calibration system, DSP functionality and streaming can be ordered with the optional stereo or surround hub.
From 3.699€ (Pair) | Buy
Audiophile ingredients.
SEAS Excel
Our drivers are manufactured by the high-end forge SEAS from Norway. SEAS stands for some of the best loudspeaker components in the world. This brings you at home unique precision and resolution in the high-frequency range. The bass range is characterized by high dynamics and impressive depth. Our developers tuned the Econik speakers with a pleasing natural balance. So nothing stands in the way of extensive music enjoyment.
24 - 30.000 Hz (+/- 3dB)
SEAS Prestige
With the 25mm fabric dome from SEAS' EXCEL series, the speaker has a real high-end tweeter. Both the perfectly shaped dome and the wide SONOMEX surround ensure outstanding performance and consistency as well as the best tolerances. The magnetic fluid has a low viscosity to ensure optimal cooling and a low resonance frequency. If you look at the tweeter outside of the housing, the 6mm thick metal front panel immediately catches the eye. With the help of the light waveguide, this ensures a linear frequency response and a stable, resonance-free connection to the housing. The massive injection-moulded rear chamber also impresses with its complex structure. This effectively suppresses resonances and reflections. Thanks to the sophisticated double magnet system, the tweeter has a higher degree of efficiency and even greater control over the voice coil and thus the impulse fidelity.
The six and a half inches driver from the SEAS Prestige series is a bass and midrange driver with long throw capability. The membrane with the distinctive speckles consists of reed/paper pulp and thus ensures a linear frequency response and at the same time a very natural melting sound. The impressive magnet system, together with the light voice coil made of copper-coated aluminum, enables excellent transient response and thus impulse response. With the help of the injection molded metal basket, all critical components always remain in perfect alignment. Large windows were integrated into the basket to reduce sound reflections, airflow noise and cavity resonances to a minimum.
Amplify & Connect.
Lossless.
Wireless.
Transfer.
WiSA & XLR
The speakers can be connected wirelessly as a 2.0 to 7.1 system with a WiSA transmitter (preamp) via WiSA (Wireless Speaker and Audio). The transmission takes place as high-resolution audio with 24-bit and 96 kHz sampling rate. The digital signal path ensures lossless transmission. The elimination of annoying loudspeaker cables results in flexible application options.
Fully active with digital crossover
Each driver is assigned its own power amplifier with 150W, so that 450W are available per speaker. The digital crossover is tuned using IIR and FIR filters, which ensures a perfect interaction of tweeter, midrange driver and bass driver. A dual DAC chip system from Cirrus Logic is installed in the signal processing. The deflection and condition of each driver is constantly monitored and dynamically adjusted. This ensures that the drivers always play undistorted and with maximum dynamics.
Optimize sound.
Sound presets
The tuning of the speaker can be fundamentally changed using downloadable sound presets. The loudspeaker is thus optimally tailored to the application and personal taste. Room acoustic problems can also be minimized in this way. For example, sound presets are available for installation close to a wall, a reverberant room, placement on a desk or for use in a studio.
Dynamic bass adjustment
The Econik loudspeakers have volume-dependent frequency adjustment in the low-frequency range. At low volume, low frequencies are perceived relatively less strongly by the ear. The result: the bass is perceived as weak and the sound as thin and tinny. Dynamic Bass Correction corrects this effect to produce a sound similar to the original volume when played back at low volume. The correction is strongest at low volume levels and decreases as the volume increases. This applies up to a volume of 70dB in the room, above which there is no further adjustment. The correction is based on the latest scientific findings and the ISO 226:2003 standard. Thanks to the dynamic bass adjustment, the loudspeakers sound clean and powerful even at low volume, so that the full sound potential can also be experienced late at night.
Our values.
Made in Germany
All Econik loudspeakers are developed in Germany and manufactured in our own factory which is also placed in Germany. During production, we make sure to work with as many suppliers from Germany or Europe as possible. This enables us to guarantee high product quality and short transport routes. As a customer, you receive a high-quality loudspeaker with numerous regionally sourced components. Made in Germany supports jobs in Germany and compliance with environmental guidelines and labor law regulations.
Sustainability
In addition to excellent sound and innovative technology, sustainability is very important to us. With the components used, we made sure to find sustainable alternatives and to meet high environmental standards. Due to the modular design of the loudspeaker, individual elements can be exchanged and the loudspeaker can be modified and improved over time. The packaging consists primarily of recycled materials or renewable raw materials. The short transport routes to our suppliers effectively save CO2.
Choose your design.
Stockholm
Cape town
Tokyo
Toronto
Add preamp.
Sketch & data.
380 x 200 x 300 mm (H x W x D) | 12.1 kg | 19 mm MDF
Specifications
| Speaker type: | 2,5 / 3 way active speaker |
| Amplification: | 3 x 150W Class-D (per speaker) |
| Tweeter: | 1 x 25 mm SEAS Excel dome tweeter with ferrofluid cooling, double magnet system for better voice coil control, SONOMEX surround by SEAS for maximum consistency, solid injection-moulded chamber with complex internal shape against resonances and reflections. |
| Mid/bass driver: | 2 x 165 mm SEAS Prestige woofer and midrange driver, edge-coated reed/paper pulp cone for a harmonious, extended frequency response, powerful magnet system with a long, light voice coil made of copper-coated aluminum for optimal transient response, extremely rigid and stable injection-molded metal basket for perfect alignment. |
| Frequency response (+/- 1,5dB): | 24 - 30.000 Hz (Sound preset: Standard) |
| Crossover: | 200 Hz / 2000 Hz (Sound preset: Standard) |
| DSP: | Quad core processor |
| DAC: | Dual CS4398 |
| Wireless: | WiSA 24 bit / 96kHz lossless |
| Connections: | Balanced / unbalanced XLR |
| Cover: | magnetic |
| Power supply: | 230 V AC |
| Dimensions (W x H x D): | 200 x 380 x 300 mm |
| Weight: | 12,1 kg |
| Finish: | Matte black, Matte white |
| Warranty: | Speakers: 5 years (10 years upon registration); Amplifier module: 2 years (5 years upon registration) |
| Place of production: | Germany |
| Quantity: | 1 pair |
| Break-in time: | 50 - 100 hours |
To the speaker configurator
Desktop klein
Econik SIX
Powerful. Fully active. Made in Germany.
A compact speaker with floorstanding speaker genes and a bass of 24 Hz? This old dream of many loudspeaker fans has come true with the Econik Six. However, the fully active loudspeaker not only scores when equipped with the two 6.5" drivers and the high-end dome tweeter from SEAS. It's also hard to beat when it comes to flexibility. You simply place the Econik Six in the room where they sound best and transmit your music in high-res via WiSA without any disruptive signal cables. Various sound presets are available to further improve the sound. This unique opportunity to adapt the speaker perfectly to your room and your needs is just part of the variety of settings available. An automatic calibration system, DSP functionality and streaming can be ordered with the optional stereo or surround hub.
From 3.699€ (Pair) | Buy
Audiophile ingredients.
SEAS Excel
Our drivers are manufactured by the high-end forge SEAS from Norway. SEAS stands for some of the best loudspeaker components in the world. This brings you at home unique precision and resolution in the high-frequency range. The bass range is characterized by high dynamics and impressive depth. Our developers tuned the Econik speakers with a pleasing natural balance. So nothing stands in the way of extensive music enjoyment.
24 - 30.000 Hz (+/- 1,5dB)
SEAS Prestige
With the 25mm fabric dome from SEAS' EXCEL series, the speaker has a real high-end tweeter. Both the perfectly shaped dome and the wide SONOMEX surround ensure outstanding performance and consistency as well as the best tolerances. The magnetic fluid has a low viscosity to ensure optimal cooling and a low resonance frequency. If you look at the tweeter outside of the housing, the 6mm thick metal front panel immediately catches the eye. With the help of the light waveguide, this ensures a linear frequency response and a stable, resonance-free connection to the housing. The massive injection-moulded rear chamber also impresses with its complex structure. This effectively suppresses resonances and reflections. Thanks to the sophisticated double magnet system, the tweeter has a higher degree of efficiency and even greater control over the voice coil and thus the impulse fidelity.
The six and a half inches driver from the SEAS Prestige series is a bass and midrange driver with long throw capability. The membrane with the distinctive speckles consists of reed/paper pulp and thus ensures a linear frequency response and at the same time a very natural melting sound. The impressive magnet system, together with the light voice coil made of copper-coated aluminum, enables excellent transient response and thus impulse response. With the help of the injection molded metal basket, all critical components always remain in perfect alignment. Large windows were integrated into the basket to reduce sound reflections, airflow noise and cavity resonances to a minimum.
Amplify & Connect.
Lossless.
Wireless.
Transfer.
WiSA & XLR
The speakers can be connected wirelessly as a 2.0 to 7.1 system with a WiSA transmitter (preamp) via WiSA (Wireless Speaker and Audio). The transmission takes place as high-resolution audio with 24-bit and 96 kHz sampling rate. The digital signal path ensures lossless transmission. The elimination of annoying loudspeaker cables results in flexible application options.
Fully active with digital crossover
Each driver is assigned its own power amplifier with 150W, so that 450W are available per speaker. The digital crossover is tuned using IIR and FIR filters, which ensures a perfect interaction of tweeter, midrange driver and bass driver. A dual DAC chip system from Cirrus Logic is installed in the signal processing. The deflection and condition of each driver is constantly monitored and dynamically adjusted. This ensures that the drivers always play undistorted and with maximum dynamics.
Optimize sound.
Sound presets
The tuning of the speaker can be fundamentally changed using downloadable sound presets. The loudspeaker is thus optimally tailored to the application and personal taste. Room acoustic problems can also be minimized in this way. For example, sound presets are available for installation close to a wall, a reverberant room, placement on a desk or for use in a studio.
Dynamic bass adjustment
The Econik loudspeakers have volume-dependent frequency adjustment in the low-frequency range. At low volume, low frequencies are perceived relatively less strongly by the ear. The result: the bass is perceived as weak and the sound as thin and tinny. Dynamic Bass Correction corrects this effect to produce a sound similar to the original volume when played back at low volume. The correction is strongest at low volume levels and decreases as the volume increases. This applies up to a volume of 70dB in the room, above which there is no further adjustment. The correction is based on the latest scientific findings and the ISO 226:2003 standard. Thanks to the dynamic bass adjustment, the loudspeakers sound clean and powerful even at low volume, so that the full sound potential can also be experienced late at night.
Our values.
Made in Germany
All Econik loudspeakers are developed in Germany and manufactured in our own factory which is also placed in Germany. During production, we make sure to work with as many suppliers from Germany or Europe as possible. This enables us to guarantee high product quality and short transport routes. As a customer, you receive a high-quality loudspeaker with numerous regionally sourced components. Made in Germany supports jobs in Germany and compliance with environmental guidelines and labor law regulations.
Sustainability
In addition to excellent sound and innovative technology, sustainability is very important to us. With the components used, we made sure to find sustainable alternatives and to meet high environmental standards. Due to the modular design of the loudspeaker, individual elements can be exchanged and the loudspeaker can be modified and improved over time. The packaging consists primarily of recycled materials or renewable raw materials. The short transport routes to our suppliers effectively save CO2.
Choose your design.
Stockholm
Cape town
Tokyo
Toronto
Add preamp.
Sketch & data.
380 x 200 x 300 mm (H x W x D) | 12.1 kg | 19 mm MDF
Specifications
| Speaker type: | 2,5 / 3 way active speaker |
| Amplification: | 3 x 150W Class-D (per speaker) |
| Tweeter: | 1 x 25 mm SEAS Excel dome tweeter with ferrofluid cooling, double magnet system for better voice coil control, SONOMEX surround by SEAS for maximum consistency, solid injection-moulded chamber with complex internal shape against resonances and reflections. |
| Mid/bass driver: | 2 x 165 mm SEAS Prestige woofer and midrange driver, edge-coated reed/paper pulp cone for a harmonious, extended frequency response, powerful magnet system with a long, light voice coil made of copper-coated aluminum for optimal transient response, extremely rigid and stable injection-molded metal basket for perfect alignment. |
| Frequency response (+/- 1,5dB): | 24 - 30.000 Hz (Sound preset: Standard) |
| Crossover: | 200 Hz / 2000 Hz (Sound preset: Standard) |
| DSP: | Quad core processor |
| DAC: | Dual CS4398 |
| Wireless: | WiSA 24 bit / 96kHz lossless |
| Connections: | Balanced / unbalanced XLR |
| Cover: | magnetic |
| Power supply: | 230 V AC |
| Dimensions (W x H x D): | 200 x 380 x 300 mm |
| Weight: | 12,1 kg |
| Finish: | Matte black, Matte white |
| Warranty: | Speakers: 5 years (10 years upon registration); Amplifier module: 2 years (5 years upon registration) |
| Place of production: | Germany |
| Quantity: | 1 pair |
| Break-in time: | 50 - 100 hours |
To the speaker configurator
Mobil
Econik SIX
Powerful. Fully active.
Made in Germany.
A compact speaker with floorstanding speaker genes and a bass of 24 Hz? This old dream of many loudspeaker fans has come true with the Econik Six. However, the fully active loudspeaker not only scores when equipped with the two 6.5" drivers and the high-end dome tweeter from SEAS. It's also hard to beat when it comes to flexibility. You simply place the Econik Six in the room where they sound best and transmit your music in high-res via WiSA without any disruptive signal cables. Various sound presets are available to further improve the sound. This unique opportunity to adapt the speaker perfectly to your room and your needs is just part of the variety of settings available. An automatic calibration system, DSP functionality and streaming can be ordered with the optional stereo or surround hub.
From 3.699€ (Pair) | Buy
Audiophile ingredients.
SEAS Excel
Our drivers are manufactured by the high-end forge SEAS from Norway. SEAS stands for some of the best loudspeaker components in the world. This brings you at home unique precision and resolution in the high-frequency range. The bass range is characterized by high dynamics and impressive depth. Our developers tuned the Econik speakers with a pleasing natural balance. So nothing stands in the way of extensive music enjoyment.
24 - 30.000 Hz (+/- 1,5dB)
SEAS Prestige
With the 25mm fabric dome from SEAS' EXCEL series, the speaker has a real high-end tweeter. Both the perfectly shaped dome and the wide SONOMEX surround ensure outstanding performance and consistency as well as the best tolerances. The magnetic fluid has a low viscosity to ensure optimal cooling and a low resonance frequency. If you look at the tweeter outside of the housing, the 6mm thick metal front panel immediately catches the eye. With the help of the light waveguide, this ensures a linear frequency response and a stable, resonance-free connection to the housing. The massive injection-moulded rear chamber also impresses with its complex structure. This effectively suppresses resonances and reflections. Thanks to the sophisticated double magnet system, the tweeter has a higher degree of efficiency and even greater control over the voice coil and thus the impulse fidelity.
The six and a half inches driver from the SEAS Prestige series is a bass and midrange driver with long throw capability. The membrane with the distinctive speckles consists of reed/paper pulp and thus ensures a linear frequency response and at the same time a very natural melting sound. The impressive magnet system, together with the light voice coil made of copper-coated aluminum, enables excellent transient response and thus impulse response. With the help of the injection molded metal basket, all critical components always remain in perfect alignment. Large windows were integrated into the basket to reduce sound reflections, airflow noise and cavity resonances to a minimum.
Amplify & Connect.
Lossless.
Wireless.
Transfer.
WiSA & XLR
The speakers can be connected wirelessly as a 2.0 to 7.1 system with a WiSA transmitter (preamp) via WiSA (Wireless Speaker and Audio). The transmission takes place as high-resolution audio with 24-bit and 96 kHz sampling rate. The digital signal path ensures lossless transmission. The elimination of annoying loudspeaker cables results in flexible application options.
Fully active with digital crossover
Each driver is assigned its own power amplifier with 150W, so that 450W are available per speaker. The digital crossover is tuned using IIR and FIR filters, which ensures a perfect interaction of tweeter, midrange driver and bass driver. A dual DAC chip system from Cirrus Logic is installed in the signal processing. The deflection and condition of each driver is constantly monitored and dynamically adjusted. This ensures that the drivers always play undistorted and with maximum dynamics.
Optimize sound.
Sound presets
The tuning of the speaker can be fundamentally changed using downloadable sound presets. The loudspeaker is thus optimally tailored to the application and personal taste. Room acoustic problems can also be minimized in this way. For example, sound presets are available for installation close to a wall, a reverberant room, placement on a desk or for use in a studio.
Dynamic bass adjustment
The Econik loudspeakers have volume-dependent frequency adjustment in the low-frequency range. At low volume, low frequencies are perceived relatively less strongly by the ear. The result: the bass is perceived as weak and the sound as thin and tinny. Dynamic Bass Correction corrects this effect to produce a sound similar to the original volume when played back at low volume. The correction is strongest at low volume levels and decreases as the volume increases. This applies up to a volume of 70dB in the room, above which there is no further adjustment. The correction is based on the latest scientific findings and the ISO 226:2003 standard. Thanks to the dynamic bass adjustment, the loudspeakers sound clean and powerful even at low volume, so that the full sound potential can also be experienced late at night.
Our values.
Made in Germany
All Econik loudspeakers are developed in Germany and manufactured in our own factory which is also placed in Germany. During production, we make sure to work with as many suppliers from Germany or Europe as possible. This enables us to guarantee high product quality and short transport routes. As a customer, you receive a high-quality loudspeaker with numerous regionally sourced components. Made in Germany supports jobs in Germany and compliance with environmental guidelines and labor law regulations.
Sustainability
In addition to excellent sound and innovative technology, sustainability is very important to us. With the components used, we made sure to find sustainable alternatives and to meet high environmental standards. Due to the modular design of the loudspeaker, individual elements can be exchanged and the loudspeaker can be modified and improved over time. The packaging consists primarily of recycled materials or renewable raw materials. The short transport routes to our suppliers effectively save CO2.
Choose your design.
Stockholm
Cape town
Tokyo
Toronto
Add preamp.
Sketch & data.
380 x 200 x 300 mm (H x W x D) | 12.1 kg | 19 mm MDF
Specifications
| Speaker type: | 2,5 / 3 way active speaker |
| Amplification: | 3 x 150W Class-D (per speaker) |
| Tweeter: | 1 x 25 mm SEAS Excel dome tweeter with ferrofluid cooling, double magnet system for better voice coil control, SONOMEX surround by SEAS for maximum consistency, solid injection-moulded chamber with complex internal shape against resonances and reflections. |
| Mid/bass driver: | 2 x 165 mm SEAS Prestige woofer and midrange driver, edge-coated reed/paper pulp cone for a harmonious, extended frequency response, powerful magnet system with a long, light voice coil made of copper-coated aluminum for optimal transient response, extremely rigid and stable injection-molded metal basket for perfect alignment. |
| Frequency response (+/- 1,5dB): | 24 - 30.000 Hz (Sound preset: Standard) |
| Crossover: | 200 Hz / 2000 Hz (Sound preset: Standard) |
| DSP: | Quad core processor |
| DAC: | Dual CS4398 |
| Wireless: | WiSA 24 bit / 96kHz lossless |
| Connections: | Balanced / unbalanced XLR |
| Cover: | magnetic |
| Power supply: | 230 V AC |
| Dimensions (W x H x D): | 200 x 380 x 300 mm |
| Weight: | 12,1 kg |
| Finish: | Matte black, Matte white |
| Warranty: | Speakers: 5 years (10 years upon registration); Amplifier module: 2 years (5 years upon registration) |
| Place of production: | Germany |
| Quantity: | 1 pair |
| Break-in time: | 50 - 100 hours |